A solvent free hard wearing and water resistant wood treatment Biofa Furniture Oil is made using high quality natural ingredients. It is solvent free, colourless oil which enhances and deepens the natural grain and tints the wood, giving a breathing, hard wearing and water resistant surface. The furniture oil is ready to use. Apply thinly with a brush or a lint free cloth. After 1 hour polish with a soft pad or a lint free cloth. A second coat after 12 hours will improve the quality of the surface. For kitchen top, we recommend you use Biofa universal wood oil solvent free 2059. Available in 750ml and 2.5 litres. Covers approx 35-30 m2 per litre

Natural Paint Ingredients: Lacquer linseed oil, soy oil, walnut oil, wood oil, castor oil, beeswax, olive oil, carnauba wax, silicic acids, colophony resin, cobalt, zirconium, manganese and zinc octoate driers, zinc soap

Our bestseller floor product acclaimed by professionals As an alternative to the Hard Varnish, it enhances the natural grain, emphasising the colour and giving an open-pored, silky matt finish that is hard wearing and water resistant. It can be used on wood and cork floors. Two coats are recommended after the Universal Priming Oil is applied. . Available in 750ml, 2.5 litres, 10 litres and 30 litres. Covers approx 10-15 m2 per litre.

Natural Paint Ingredients: aliphatic hydrocarbon (plant based vinegar), colophony resin, micro-crystalline wax, clay, soy lecithin, caster oil, cobalt-zirconium, zinc and manganese octoate dryers, silicic acids, citrus peel oil, safflower oil.

As an alternative to the Hard Varnish, hard wax oil or hard oil, the Universal wood Oil is solvent free Oil-wax mixture, which improves wood permanently and guarantees a hard-wearing surface. It only requires a single coat. It enhances the natural grain, emphasising the colour and giving an open-pored, silky soft sheen finish that is hard wearing and water resistant. It can be used on wood and cork floors. One coat is recommended on bear wood. Apply evenly with a short-haired roller. After one hour, spread out remaining universal wood Oil (shiny patches) with a squeegee and allow the oil tobe absorbed. When the entire surface is saturated (even sheen across the entire floor), remove all remaining oil with a squeegee. Work in with a disc machine and a green pad. Dry and polish with a new green pad. If the surface is not quite even, polish with a white pad. (Note that not using a machine would result of the oil not drying and the wood being sticky.) Available in 750ml and 2.5 litres. Covers approx 20 to 30 m2 per litre

Natural Paint Ingredients: Linseed oil, wood oil, colophony resin ester, zinc oxide, micro wax, cobalt-, zirconium- and manganese-octoate driers.

An ideal solvent free, colourless wax, for stone, floor, clear wood… It is a solvent free, colourless, silky matt hard wax. it penetrates well, is water repellent, breathable, anti static, pleasant-smelling and heat resistant to 100 degrees. Suitable for all timber and cork floors. With a putty knife, remove a nugget of wax and polish with a white pad. Spread the wax evenly and repeat if necessary. It allows the wood to breathe and is dirt and water repellent. Available in 200ml and 1 litre. On un-primed wood, one litre covers 8-10 m2.

Natural Paint Ingredients: Candellila wax, beeswax, carnauba wax, paraffin wax, colophony resin, linseed oil, cobalt, zirconium, manganese and calcium-octoate drier.

Coloured, solvent free oil made from natural raw materials. Strong, breathing and anti-static, sweat saliva proof. This product is available in 11 different colours. Coloured, solvent free oil made from natural raw materials. Strong, breathing and anti-static, sweat saliva proof. This product is available in 11 different colours. Apply very thinly and evenly. Any remaining COLOUR OIL must be taken off with a cloth after 30 minutes; otherwise, it will cause a sticky, uneven surface. The COLOUR OIL has to be considered as priming oil. Two coats of UNIVERSAL HARD OIL have to be applied on top. Apply very thinly and evenly. Any remaining COLOUR OIL must be taken off with a cloth after 30 minutes; otherwise, it will cause a sticky, uneven surface. The COLOUR OIL has to be considered as priming oil. Two coats of UNIVERSAL HARD OIL have to be applied on top.

Natural Paint Ingredients: Linseed oil, castor oil, colophony resin, clay, zinc oxide, micro-crystalline wax, various pigments according to colour, cobalt and zirconium-octoate driers.